safe OPA is a ready-to-use product, do not dilute it. Before dipping medical devices and instruments into safe OPA, clean and rinse thoroughly with enzymatic. Immerse surgical instruments, endoscopes, medical devices into the safe OPA prepared for the endoscopy device or decontamination tub. Be sure to immerse the ingredients completely in the solution. Immerse your instruments for a minimum of 5 minutes, which is the effect time, and keep the decontamination bath closed, rinse thoroughly with distilled water or ionized water at the end of the dipping process.

Use the product for a maximum of 14 days. The stability of the remaining product after opening the cap is 75 days. If it is not cleaned sufficiently, it can paint on organic dirt due to its midfilaldehyde feature. The effectiveness of the product is monitored with MEK control strips.

Liquid

%0,55 Ortofitalaldehit, korozyon inhibitörleri, de iyonize su

safe INS is used for the cleaning and disinfection of medical and surgical instruments, endoscopes, anesthesia materials, heat-resistant and non-durable surgical instruments and other materials, including MIC instruments. It is used in endoscopy and ultrasonic washing machines.

safe INS is a concentrated product, dilute according to the duration of action according to the table below. Allow a short time for the solution to spread evenly. Immerse endoscopes, anesthesia materials, heat-resistant and non-durable surgical instruments and other materials, including MIC instruments, into the ultrasonic washing device or decontamination bath ready for safe INS. Be sure to immerse the ingredients completely in the solution. Keep it on for the duration of the effect.

If the safe INS solution is to be used for decontamination of a material that has used aldehyde derivatives, a detailed description of the instruments.
somehow aldehyde residues should be removed. If there is aldehyde residue, it may cause color change on the product.

Shelf life at room temperature is 2 years. Opened product should be used within 6 weeks. Safe INS in use, pollution
should be changed according to the situation. This period should not be more than 14 days. The effectiveness of the product is monitored with MEK Control strips.

MICROORGANISM	%2	%1	%0,5	%0,25
BACTERICIDAL	5 mins	10 min	15 mins	60 mins
MRSA, VRE, ACINETOBACTER	5 mins	10 min	15 mins	60 mins
FUNGUSIDAL	5 mins	10 min	15 mins	60 mins
MICROBACTERICIDAL	15 mins	60 mins
VIRUSIDAL				5 mins

Liquid

Bis (3-aminopropyl) dodecylamine Didesylldimethylpolyethoxyammonyumpropionate
Contains anti-corrosion ingredients

Nonionic Tensides, Corrosion inhibitors and other auxiliaries

Efficacy against tuberculosis report EN 14348, Efficacy against bacteria report EN 13727

Activity report against fungi EN 13624, Activity study against viruses EN 14476

According to safe INS, TS EN ISO 2812-1, corrosion, deformation and discoloration tests were carried out by the accreditation body.

safe ENZYFOAM Köpük formda beşli enzim içeren bir üründür. It can be used safely in Operating Rooms, Endoscopy Rooms and Dental Units.

After the use of surgical instruments, it breaks down blood, fat, protein, carbohydrate and starch residues remaining on the instruments.

It dissolves dried residues. It makes cleaning easy. It prevents spills and splashes during transportation.

It prevents contaminating agents from sticking on the instruments and drying.

It does not damage sensitive metal, rubber and plastic materials.

Thanks to the auxiliary components it contains, it inactivates the microorganism during material transfer and ensures personnel safety.

Safe ENZYFOAM is sprayed in foam form after using the tools.

Tools covered with foam are sent to the decontamination unit.

Foam Form

Protease,

Amylase,

Lipase,

Didesyl Methyl Ammonium Chloride 0.25%,

Benzyl-C12-18- Alkyl Dimethyl Ammonium Chloride 0.25% Corrosion Inhibitors,

Surfactants,

Contains pH Stabilizer and other auxiliary compounds.

safe ENZYFOAM It is a product containing five enzymes in foam form. It can be used safely in Operating Rooms, Endoscopy Rooms and Dental Units.

After the use of surgical instruments, it breaks down the blood, fat, protein, carbohydrate and starch residues remaining on the instruments.

It dissolves dried residues. It makes cleaning easy. It prevents spills and splashes during transportation.

It prevents contaminating agents from sticking on the instruments and drying.

It does not damage sensitive metal, rubber and plastic materials.

Thanks to the auxiliary components it contains, it inactivates the microorganism during material transfer and ensures personnel safety.

Safe ENZYFOAM is sprayed in foam form after using the tools.

Tools covered with foam are sent to the decontamination unit.

Foam Form

Protease,

Amylase,

Lipase,

Didesyl Methyl Ammonium Chloride 0.25%,

Benzyl-C12-18- Alkyl Dimethyl Ammonium Chloride 0.25% Corrosion Inhibitors,

Surfactants,

Contains pH Stabilizer and other auxiliary compounds.

It is a product that contains a combination of hydroxy PAA, hydrogen peroxide and peracetic acid.

It is an ideal product for high-level disinfection of medical and surgical instruments, endoscopes, anesthesia materials, heat-resistant and non-durable surgical instruments and other materials, including MIC instruments.

It is suitable for endoscopy washing devices and manual use. There is no harm in taking it into the environment.

hydroxy PAA is a concentrated product, dilute according to the duration of action according to the table below. Allow a short time for the solution to spread evenly. Immerse endoscopes, anesthesia materials, heat-resistant and non-durable surgical instruments and other materials, including MIC instruments, into the endoscopy washing device or hydroxy PAA, which is prepared in the decontamination tub.

Be sure to immerse the ingredients completely in the solution. Keep it on for the duration of the effect.

The materials should be pre-cleaned before hydroxy PAA disinfection.

It is not suitable for copper and brass-containing materials.

Shelf life at room temperature is 2 years. Opened product should be used within 6 weeks.

The hydroxy PAA in use should be changed according to the pollution condition. This period should not be more than 14 days.

The effectiveness of the product is monitored with MEK control strips.

 

MICROORGANISM	Duration of Effect	MICROORGANISM	Duration of Effect
Bactericidal	5 minutes	Microbactericidal	5 minutes
Mrsa, Vre, Acinetobacter	5 minutes	Virusidal	5 minutes
Fungusidal	5 minutes	Sporisidal	10 min

Liquid

Hydrogen Peroxide, Peracetic Acid, Non Ionic Surface
Contains Active Ingredients Stabilizer, Anti-Corrosion Ingredients

Efficacy against tuberculosis report EN 14348, Efficacy against bacteria report EN 13727

Activity report against fungi EN 13624, Activity study against viruses EN 14476

hydroxy PAA, according to TS EN ISO 2812-1, corrosion, deformation and discoloration tests were carried out by the Accreditation body.

spry nest is a ready-to-use product. It can be used safely on any surface where wetting is not inconvenient.
Spray the surface from a distance of 30 cm or apply a moist wipe by spraying the foam form onto the cloth and wait for the duration of the effect. At the end of the action period, wipe it with a clean cloth that does not leave particles and lint.

Liquid

% w / w Didesyl Methyl Ammonium Chloride 0.25%, Benzyl-C12-18- Alkyl Dimethyl Ammonium Chloride 0.25% C12-14-Alkyl [(Ethylphenyl) Methyl] Dimethyl Ammonium Chloride 0.25%

Microorganism	Application Area and Shape	Time
Bakterisid: S. aureus ATCC 6538, P. aeruginosa ATCC 15442,E.hiraeATCC 10541, E.coli ATCC 10536	Surface – Spray	1 min
Fungusid: C. albicans ATCC 10231, A. niger ATCC 16404	Surface – Spray	1 min
Virus inactivation: Adenovirus type5,Poliovirus type1, Murine norovirus Strain S99 Berlin	Surface – Spray	1 min

The spry is sprayed to the surface to be applied from a distance of 30 cm to ensure that the surface is completely wet, waited for the duration of the effect, wiped with a clean cloth and left to dry. The product is a ready-to-use solution. Use undiluted. If desired, it can be used in both foam and spray form.

Liquid

Ethanol% w / w 40.0, 2-Propanol% w / w 10.0, Didesyl Dimethyl Ammonium Chloride% w / w 0.25

Pest Type	Application Area and Shape	Duration of Effect
Bakterisid: S. aureus ATCC 6538, P.aeruginosa ATCC 15442,E.hirae ATCC 10541, E.coli ATCC 10536	Surface-Spray	1 min
Fungusid: C. albicans ATCC 10231, A. Niger ATCC 16404	Surface-Spray	1 min
Virus inactivating:Adenovirus, type 5, strain Adenoid 75, ATCC VR-5, Poliovirus type 1, LSc-2ab, Murine norovirus Strain S99 Berlin	Surface-Spray	1 min

quarta oxy FACE is a concentrated product. It is used for floor and surface disinfection of areas requiring high level disinfection such as operating theaters, intensive care units, isolation rooms.

quarta oxy FACE is used by diluting with tap water at the rates specified in the table. Wet mop, wet wiping and double bucket disinfection system etc. used in application methods. Since it is odorless, it can be used easily in the presence of the patient. The solution can be used up to 24 hours depending on the dirtiness.

(1 Liter water / 10 ml solution – 10 Liter water / 100 ml solution)

Before quarta oxy FACE cleaning and disinfection, if a floor surface disinfectant containing QAC or AMIN was used in the area before, odor may occur on your mats during the removal of stains and old chemicals in order for the floor to recover for a while.

Liquid

Didesyl Methyl Ammonium Chloride, Alkyl Benzyl Dimethyl Ammonium Chloride and Hydrogen Peroxide

Microorganism	Application Area and Shape	Concentration and duration
Bakterisid (Tbc Including)	Ground and Surfaces	1% – 15 minutes
Fungicide	Ground and Surfaces	1% – 15 minutes
Virus inactivation (including HIV, HCV, HBV, Poliovirus, Adenovirus and Norovirus)	Ground and Surfaces	1% – 15 minutes

quarta FACE is a concentrated product. It is used for floor and surface disinfection of areas requiring daily disinfection such as Adult and Neonatal Intensive Care, Isolation rooms, Laboratories, Emergency services, Dialysis Units and Operating theaters.

quarta FACE is used by diluting with tap water at the rates specified in the table. Wet mop, wet wiping and double bucket disinfection system etc. used in application methods. It can be used easily in the presence of personnel and patients. It can be prepared again according to the pollution condition.

THE AMOUNT OF WATER	%0,25
1	2,5 ml
10	25 ml
20	50 ml

Liquid

Aminopropyl Dodecylamine, Didesyl Methyl Ammonium Chloride

Microorganism	Application Area and Shape	Concentration – Duration
Bactericide (Including TBC)	Ground and Surfaces	0.25% – 15 minutes
Fungicide	Ground and Surfaces	0.25% – 15 minutes
Virus inactivation: HIV, HBV, HCV, Adenovirus, Poliovirus, Norovirus dahil)	Ground and Surfaces	0.25% – 15 minutes

Hygienic Hand Washing: Take off all your jewelery. After wetting the hands with water, take at least 5 ml of sept SP Antiseptic Liquid Soap in your palm, rub it for 1 minute according to hygiene rules so that your hands are completely wet. Hands should be thoroughly rinsed under water and dried with a sterile towel.

Surgical Hand Washing: Take off all your jewelery. After the hands are wetted with water, take at least 5 ml of sept SP Antiseptic Liquid Soap in your palm, rub your hands and arms up to the elbow area according to the hygiene rules. This process is 3 min. Repeat at least 2 times throughout. Then the washed area should be rinsed under water and dried with a sterile towel.

Liquid

Chlorhexidine gluconate 4g,

2-propanol 4g.

Pest Type	Area of application and shape	Application amount	Application range
Bactericide:S.AureusATCC6538, P. aeruginosaATCC15442, E.hiraeATCC10541, E.coliK12 NCTC10538,	Hand-Skin	3-5 ml	Before contact
Fungicide: C. Albicans ATCC10231,	Hygienic – Surgery	3-5 ml	Before contact
Virus Inactivating: Adenovirus type 5, Poliovirus type 1, Murine Norovirus ,Strain S99 Berlin	Washing	3-5 ml	Before contact